A.N.T.
06-11-2010, 03:54 AM
Just received one, bought for £25 +£10 delivery. Arrived in a very good condition, W&F 0.045% WRMS, almost on spec, the amorphous heads look new, the frequency response is excellent. However the sound is not good at all. I did some measurements and found two major problems and several smaller ones. Major issues are:
1) it uses several 4066 chips in the signal path AND an additional non-linear JFET muting circuit on the output.
2) the meter rectification IC (IC801, BA6800A) introduces a horrible amount of distortion in the output signal. Pictures show the spectrum of 1 kHz -20 dB from Dolby level signal just passing through the deck in the SOURCE monitor mode. First - with meters connected and second with meters disconnected (CN121 connector is detached).
I may post some simple modification details later - this deck can perform much better!
Alex
1) it uses several 4066 chips in the signal path AND an additional non-linear JFET muting circuit on the output.
2) the meter rectification IC (IC801, BA6800A) introduces a horrible amount of distortion in the output signal. Pictures show the spectrum of 1 kHz -20 dB from Dolby level signal just passing through the deck in the SOURCE monitor mode. First - with meters connected and second with meters disconnected (CN121 connector is detached).
I may post some simple modification details later - this deck can perform much better!
Alex