POWER Cord....

[tandberg]

Hi, as you might know, the earliest 3000 series had a powercord with a 2 prong connector, similar to the 3 prong used today.

That 2 prong, is it available separately, so I can solder it to a ordinary powercord ?

Which brand / Store ?

Take a look at the picture, of course I mean the connector wich is supposed to fit in the backside of the Tandberg, not the plug wich goes into the European 230 Volt outlet.....

[macster]

Do you mean something like this?

http://i.ebayimg.com/t/2-Prong-Power-Cord-Studer-Revox-Equipment-NEW-/02/!B8Z6Q+wEGk~$(KGrHqUOKooEy+jC1DCGBM2-BdQZbw~~0_35.JPG

http://www.ebay.com/itm/2-Prong-Power-Cord-Studer-Revox-Equipment-NEW-/380178446006?pt=Vintage_Electronics_R2&hash=item588466b6b6

M~

[jdurbin1]

Or this:

http://www.ebay.com/itm/High-quality-2-prong-8-18-AWG-replacement-power-cord-Tandberg-Revox-others-/360397940800?pt=LH_DefaultDomain_0&hash=item53e9642840

that one is mine... but if one of you guys needs one of these, just buy it directly - it's a Hosa PWC-178 and you can get them for under $8 lately.

For you folks in Europe, I am happy to send you one at a TH price *reelspin*

John

[tandberg]

Hmmm..... I want a separate/loose two prong that fits in the socket on the backside of old 3000 units. Not with cable, certainly not US cable.

I want one wich I can screw/solder to a cable myself.........

-Or if not possible, the other end should look like this

http://www.biltema.se/ProductImages/35/large/35-192_l.jpg

[Mark J]

You need an IEC C9 connector. They are out there, somewhere.

[Socal Sam]

Or this:

http://www.ebay.com/itm/High-quality-2-prong-8-18-AWG-replacement-power-cord-Tandberg-Revox-others-/360397940800?pt=LH_DefaultDomain_0&hash=item53e9642840

that one is mine... but if one of you guys needs one of these, just buy it directly - it's a Hosa PWC-178 and you can get them for under $8 lately.

For you folks in Europe, I am happy to send you one at a TH price *reelspin*

John

Will your plug fit vintage Accuphase separates like the P300, C200, and T100 set?

[tandberg]

You need an IEC C9 connector. They are out there, somewhere.



*bigthumbup* http://www.google.com/imgres?q=IEC+C9+connector&hl=en&client=opera&sa=X&rls=nb&channel=suggest&tbm=isch&prmd=imvns&tbnid=EPoRNK2eAvevpM:&imgrefurl=http://en.shsap.com/Trade/Search.asp%3FSortID%3D46%26TypeID%3D917&docid=0WiNKTrcoZHGDM&imgurl=http://en.shsap.com/Trade/Pic/435772006713160352.jpg&w=671&h=369&ei=OtueTvPkLsjzsgbPy6SzCQ&zoom=1&iact=hc&vpx=89&vpy=164&dur=8&hovh=166&hovw=303&tx=136&ty=96&sig=100314673491656977776&page=1&tbnh=112&tbnw=204&start=0&ndsp=17&ved=1t:429,r:0,s:0&biw=1248&bih=660

That's the one I wanted, just need to se if anyone in Europe got them.

[jdurbin1]

Not sure, I haven't seen the power socket on one of those. The other seller says they will but the pics seen I've don't seem to show the same 2-pin.

John

Will your plug fit vintage Accuphase separates like the P300, C200, and T100 set?

[tandberg]

If anyone know where to buy the 2 pole connector-far left- let me know *Hi5*

http://www.ebay.de/itm/Netzkabel-Adapter-Gold-WBT-Anschlus-ReVoX-Tandberg-BRAUN-Korg-Roland-/270822782258?pt=LH_DefaultDomain_77&hash=item3f0e4bb532

[jdurbin1]

Why not just take the cable I mentioned and install a good quality 2-pin 230V plug on the other end?

John

[390FE]

I think I remember Allied Electronic & DigiKey (though Allied is easier to look through & I think a little lower cost) having that style cord listed in their online catalog when I was looking for raw power cord for my employer the other day.

Hope this helps.