What Parts Machines Do You Have?

[Socal Sam]

Here are mine:

Marantz 2500 -- not much left, still have most of the pots and selector switches.
Marantz 2226B -- mostly complete, the amp probably works
Concept 6.5
Concept 4.5
Concept 2.5
Concept 2QD TT
Sansui G-9000 knobs
Marantz various knobs

The Concept 2.5 and 4.5 should go to the dump...

[Web Police]

Not much, just a Pioneer CTF-9191 cassette deck. Everything else I have works or at least it did the last time I used it

[Scorpion8]

None. Had a Technics RS-M255x but cannibalized it for some stuff and sent the hulk to the dump. There's nobody else local I know of that does this stuff, so saving the parts carcass was only taking up room.

[Socal Sam]

Seems like I have a lot of machines in my Bone Yard! There are tons of gear around here including many broken Marantz for cheap, which are always useful.

[jbeckva]

Got one... A pioneer VSX-D1S (aside from my working one). When I got it, it wasn't putting anything out at all. Fixed that by bypassing the protection circuit (buahaha.. yeah kids, don't try that at home). Then thought I could recap it.

It died on the operating table. They wanted to sue for malpractice due to my bad eyesight. *eyepop*

Now I keep it around as a guinea pig. It has a couple of brand new caps I haven't bothered yanking out of it yet.

And if L.A. ever pisses me off, I'll film a quick clip of it being dropped out of a 2nd story window. "oh the humanity!!!!" *devil*

(yanno I'm just kidding with ya LA... *Spin*)

[BroonsBane]

The only one I have is a Yamaha CA-610II. Keeping it around just in case the CA-610II I have that does work and never use ever needs a part. D'uh.

[imasoundhound]

i've got:

marantz 6300 turntable
rotel rq-1000 turntable
yamaha m-50 power amp
harman kardon hk-505 integrated amp

nad 3150 and 3300 integrated amps may become parts units

[no1maestro]

I suppose I've been waiting for a post such as this. I have a Teac X7-MkII sitting in the studio which has been diagnosed as having a bad drive motor. A technician said that the FF and REW motors and the electronics are fine but that it would be near impossible to find a new drive motor. It isn't worth the shipping but if someone local was interested, I would love to cut my loss and give them a chance with it!!

[TheReeler]

Sometimes I take some electronic parts from a Pioneer CT-F600 cassette tape deck and a Teac A-2050 R2R deck. Both were K.O.

EDIT: If someone needs some part of that machines... just ask!.